Top 8 Gould Well Pump 15 Hp

0

Nowadays, there are so many products of gould well pump 1.5 hp in the market and you are wondering to choose a best one.You have searched for gould well pump 1.5 hp in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings gould well pump 1.5 hp which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

912 reviews analysed

1. Goulds J5S Shallow Well Jet Pump, 115/230 volt, 1/2 hp

Goulds J5S Shallow Well Jet Pump, 115/230 volt, 1/2 hp

Feature

2. Hallmark Industries MA0419X-12A Deep Well Submersible Pump, 2 hp, 230V, 60 Hz, 35 GPM, 400′ Head, Stainless Steel, 4"

Hallmark Industries MA0419X-12A Deep Well Submersible Pump, 2 hp, 230V, 60 Hz, 35 GPM, 400' Head, Stainless Steel, 4"

Feature

Description

Size:full size

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

3. GOULDS Pumps GT20 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 2 hp, Blue

GOULDS Pumps GT20 IRRI-Gator Self-Priming Single Phase Centrifugal Pump, 2 hp, Blue

Feature

4. Goulds J10S Shallow Well Jet Pump

Goulds J10S Shallow Well Jet Pump

Feature

Description

compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

5. Goulds J5 Convertible Jet, Deep Well Pump – 115v/230v – 1/2 hp

Goulds J5 Convertible Jet, Deep Well Pump - 115v/230v - 1/2 hp

Feature

Description

Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing

6. WAYNE WLS150 1.5 HP High Volume Cast Iron Lawn Sprinkling Pump

WAYNE WLS150 1.5 HP High Volume Cast Iron Lawn Sprinkling Pump

Feature

Description

Size:1.5 HP

Product Description

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

From the Manufacturer

The Wayne WLS150 cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The dual voltage motor is factory wired for 230-Volt. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

7. 2 HP 4" Submersible Well Pump Complete Set Incl Motor, Pump-end and Control Box. 450ft Maxhead, Rated 15gpm, 22gpm Max. 1-phase 230v, 60Hz, 1.5kw, 3450 rpm, 1 Year Warranty. (Tuhorse TH4-015-12)

2 HP 4" Submersible Well Pump Complete Set Incl Motor, Pump-end and Control Box. 450ft Maxhead, Rated 15gpm, 22gpm Max. 1-phase 230v, 60Hz, 1.5kw, 3450 rpm, 1 Year Warranty. (Tuhorse TH4-015-12)

Feature

Description

This complete submersible well pump set includes a 12 stage pump-end, a 2HP heavy duty oil cooled submersible motor, and a dual capacitor metal cased control box equipped with motor overload protectors.

Flow at typical depth: 21GPM at 150ft., 17GPM at 250ft., 14GPM at 330ft., 7GPM at 435ft.

Connector terminal inside the control box accepts up to AWG #8 solid wire or #6 stranded wire.

This pump runs on 230V, 60Hz, Single Phase Power, and the motor uses 3 wires + 1 ground wire.

Net weight 40Lb.(18Kg); Net length: 39” (1000mm).

1 year warranty.

external check valve(not included) is required in a water tight system but is not required for free flow applications.

8. Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump 3/4HP

Goulds-J7S Single Nose Shallow Well Goulds-Jet Pump 3/4HP

Feature

Description

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

Conclusion

By our suggestions above, we hope that you can found Gould Well Pump 15 Hp for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general