
Finding your suitable readers for copper flex for ice maker is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for copper flex for ice maker including detail information and customer reviews. Let’s find out which is your favorite one.
836 reviews analysed
1. Certified Appliance Accessories Braided Stainless Steel Ice Maker Connector, 15ft
Feature
- Braided stainless Steel ice maker connector
- 1/4 inch fem. x 1/4 inch fcm
- Upc, NSF/ANSI 61 & case certified Certified Appliance Accessories recommends installation of this product be performed by a licensed professional
- 15Ft
- Braided stainless steel
- 1/4 -Inch Comp x 1/4-Inch Comp
- 5 year warranty- From the Manufacturer
Description
Product Description
Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.
From the Manufacturer
Ice Maker Connectors (15-Foot)
2. Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
Feature
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Description
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
3. Eastman 48398 Copper Ice Maker Installation Kit with Self-Piercing Saddle Valve and 15 ft. Copper Tube
Feature
- CONTENTS: Eastman’s 15 foot Copper Icemaker Installation Kit includes everything you need to connect a water line to your icemaker. The icemaker installation kit includes 1/4-inch x 15′ Copper Tube, Self-piercing saddle valve,1/4-inch Union, Female flare x 1/4-inch Comp adapter
- COMPATIBILTY: It is a universal icemaker hookup kit which can easily fit most major refrigerator brands. The 15 ft. roll of copper tubing can be cut to length for a perfect fit
- DURABLE: The copper body of the tube provides long-lasting durability
- MATERIAL: The tube is made of high quality, heavy-duty copper which provides strength and durability
- EASY INSTALLATION: The ice humidifier package includes additional hardware which makes it easy to install without any hassle
Description
Product Description
The Eastman 48398 Ice Maker Installation Kit is the perfect solution for any household. It includes a 15 Feet tube which is made of high-quality copper that provides strength and durability. The 15 ft. roll of copper tubing can be cut to length for a perfect fit.
The kit is universal which fits many major refrigerator brands with ease and provides water to ice-makers, ice and water dispensers. The package includes 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. The Eastman Icemaker Installation Kit includes everything you need to connect a water line to your icemaker.
From the Manufacturer
Eastman’s 15′ Copper Installation Kit includes everything you need for easy installation. The kit fits most refrigerators and provides water to icemakers, ice and water dispensers. Packaging includes a 15′ copper water supply line, 1 self-piercing saddle valve and union, and a female flare x comp adapter. Additional installation hardware is included.
4. Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
Feature
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Description
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
5. Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box, 1/2-Inch Sweat with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch Sweat inlet connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough Opening: 5-3/4-inch L x 3-1/2-inch x 4-7/8-inch H
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60232 Sweat Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Sweat inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
6. LDR 509 5100 Ice Maker/Humidifier Installation Kit, 1/4-Inch x 25-Foot, Poly Tubing
Description
Product description
Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.
From the Manufacturer
LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.
7. IPS CORPORATION GIDDS-284201 Ips Water-Tite Round Icemaker Valve Outlet Box with Quarter Turn Valve And Stainless Supply Line, Copper Sweat, Lead Free
8. Everflow Supplies 2662-NL Lead Free Stainless Steel Braided Ice Maker Supply Line with Two 1/4" Fittings on Both Ends, 24"
Description
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 24 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
9. Keurig C K-Elite Maker, Single Serve K-Cup Pod Brewer, with Iced Coffee Capability, Extra Included, 75oz, Brushed Silver Plus Filter Bundle
Feature
- Strong brew button: increases the strength and bold taste of your coffee’s flavor.
- Brews multiple cup sizes: 4, 6, 8, 10, 12oz enjoy the most popular cup sizes.
- Iced setting: brew hot over ice at the touch of a button for full-flavored, delicious Iced Coffee.
- Hot water on demand button: Perfect for instant soups or oatmeal.
- Large 75oz water reservoir: allows you to brew 8 cups before having to refill, saving you time and simplifying your morning routine. Removable reservoir makes refilling easy.
Description
The Keurig K-Elite brewer blends a premium finish and programmable features to deliver both modern design and the ultimate in beverage customization. With a striking brushed finish and metal details, it’s a stylish addition to any kitchen. The Keurig K-Elite single serve Coffee maker features strong brew for when you want to brew a bolder cup of Coffee, and an Iced button to brew hot over ice for a refreshing, full-flavored Iced Coffee. It features five brew sizes, so you can brew your favorite Coffee, tea, hot cocoa, or iced beverage at the touch of a button. Choose from hundreds of delicious varieties of K-Cup pods, or brew your own ground Coffee using the universal My K-Cup reusable coffee filter (sold separately). The K-Elite brewer offers programmable features like auto on and temperature control, as well as providing hot water on demand for instant soups and oatmeal, and the large 75oz removable water reservoir lets you brew 8 Cups between refills.
10. Eastman 60233 PEX Pre-assembled Ice Maker Outlet Box, 1/2 Inch Crimp PEX Connection with Installed 1/4-Turn Ball Valve, White
Feature
- CONNECTION: 1/2 inch Crimp PEX (F1807) Connection and 1/4-inch OD compression outlet
- DIMENSIONS: Rough opening of 5-3/4-inch W x 4-7/8-inch H x 3-1/2-inch D
- Faceplate Dimensions: 8-1/4-in w x 7-5/16-in H
- CONTENTS: Along with the ice maker box this pack includes a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover
- DESIGN: This outlet box is designed for recessed residential applications
- EASY INSTALLATION: One-piece design makes installation quicker and easier
Description
This Eastman 60233 Pex Pre-assembled Ice Maker Outlet Box is designed for recessed residential applications. It has a 1/2 inch Crimp PEX inlet connection and a 1/4-inch OD compression outlet with a rough opening of 5-3/4-inch width x 4-7/8-inch height x 3-1/2-inch diameter.
The outlet box comes complete with a pre-installed 1/4-turn ball valve, support bracket, and a faceplate cover of dimensions 8-1/4-inch width x 7-5/16-inch height. It is built with one-piece box and flange design. Valves governed by this Standard are intended for service at temperatures between 34⁰ F (1⁰ C) and 180⁰ F (82⁰ C), with an allowable working pressure rating not less than 125 PSI (862 kPa).
Conclusion
By our suggestions above, we hope that you can found Copper Flex For Ice Maker for you.Please don’t forget to share your experience by comment in this post. Thank you!